Apollo 3/4 in. x 100 ft. Red PEX-A Expansion Pipe3 4 in. Red PEX A Expansion Pipe, 100 ft. Durable, flexible PEX A tubing designed for potable water systems and hot water distribution. The full flow design and reduced coil memory simplify runs with fewer fittings while resisting corrosion and cracking. Rated for demanding temperatures and pressures in residential or commercial plumbing. Key Features: Superior Flexibility: PEX A material bends easily for fewer joints and leak points Full Flow

3/4 in. Red PEX-A Expansion Pipe, 100 ft.

Durable, flexible PEX-A tubing designed for potable water systems and hot water distribution. The full-flow design and reduced coil memory simplify runs with fewer fittings while resisting corrosion and cracking. Rated for demanding temperatures and pressures in residential or commercial plumbing.

---

Key Features:

• Superior Flexibility: PEX-A material bends easily for fewer joints and leak points
• Full-Flow Performance: Expanded connections maintain maximum water output
• Heat-Repairable: Kinks can be repaired with heat to avoid extra couplings
• High Temperature/Pressure Rating: Up to 200°F and 160 psi for tough applications
• Corrosion Resistant: Cross-linked polyethylene resists scale and degradation

Please check the Product Data Sheet Here

---

Specifications Table:

Specification	Details
Application	Potable Water
Color	Red
Connectivity	Barb; compatible with expansion, crimp, clamp, or sleeve methods
Material	Cross-Linked Polyethylene (PEX-A)
Maximum Flow Rate	2.3 GPM
Maximum Working Temperature (F)	200
Maximum Working Pressure (psi)	160
Minimum Working Temperature (F)	-40
PEX Type	A
Pack Size	1
Pipe Features	Corrosion Resistant, Ductile, Flexible
Product Weight (lb.)	10.45
Actual Inside Diameter (in.)	0.671
Actual Outside Diameter (in.)	0.875
Nominal Inside Pipe Diameter (in.)	3/4
Pipe Wall Thickness (in.)	0.102
Product Length (ft.)	100
Certifications and Listings	ANSI, ASTM, CSA Listed, NSF Listed; CSA B137.12; cNSFus-pw
Manufacturer Warranty	25 Years (for exclusive use with ASTM F1960 fittings)
Maximum Pressures/Temperatures	160 psi @ 73.4°F; 100 psi @ 180°F; 80 psi @ 200°F
System Compatibility	Compatible with Uponor and Wirsbo PEX systems; Tectite by Apollo push-to-connect
Installation Environments	In concrete, gypsum-based lightweight concrete, sand, asphalt, under wood flooring, behind wallboard or plaster

---

Frequently Asked Questions (FAQ):

Q: What fittings are compatible?
A: Use ASTM F1960 expansion fittings; also compatible with crimp, clamp, or sleeve methods and Tectite by Apollo push-to-connect fittings.

---

Q: Is this suitable for potable water?
A: Yes. It is listed for potable water applications and meets NSF standards.

---

Q: What are the temperature and pressure ratings?
A: 160 psi at 73.4°F, 100 psi at 180°F, and 80 psi at 200°F.

---

Q: Can it be used for radiant or in-slab installs?
A: Yes, it may be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, under wood flooring, or behind walls.

---

Q: What is the inner and outer diameter?
A: Approx. 0.671 in. ID and 0.875 in. OD with 0.102 in. wall thickness.

---

Streamlined Utility in Bold Hot-Water Red

This vibrant red PEX-A coil brings a crisp, architectural clarity to utility runs, turning the unseen into a study of clean lines. Its supple bend radius creates uninterrupted paths, a quiet luxury behind the walls. Pair with brass manifolds for a refined, engineered look in exposed utility rooms. It’s the discreet backbone of a high-performing, modern home.

---

Upgrade your plumbing with flexible, full-flow PEX-A performance—add this 100 ft. coil to your project today.

Warranty

Installation